• ST 250 intercooler R4950

    Bar and plate core. High performance core.
    *Core Size: 610mm x 220mm x 70mm
    *Pipe Size :60mm
    Fits in exactly the same space , no need for extra pipes

    All brackets welded to main body, Take yours out and this one fits in same space with same pipes.

    ASS system needs to be deleted with this cooler.

  • ST 225 Intercooler R4500

    Focus St 225 / Ford Kuga and Focus TDCI
    *Bar and plate core. High performance core.
    Core Size: 610mm x 300mm x 76mm
    Pipe Size : 50mm

    Fits in exactly the same space , no need for extra pipes

    All brackets welded to main body, Take yours out and this one fits in same space with same pipes.

  • ST 180 intercooler R4800

    Bar and plate core. High performance core.
    *Core Size: 720mm x 150mm x 76mm
    *Pipe Size :63mm
    Fits in exactly the same space , no need for extra pipes
    High Flow cast tanks
    All brackets welded to main body, Take yours out and this one fits in same space with same pipes.

  • FOCUS ST250 intake crossover pipe R2300

    High Flow intake pipe
    Increased Flow
    All Aluminum
    Can be coloured to choice
    Complete with Silicone and
    Clamps

  • Ford Ranger 2.2 3.2 Throttle pipes R1250

    Replaces stock rubber pipes
    with aluminum section and
    5 layer silicone couplers with clamps

  • Focus ST225 Intake pipe R2300

    High Flow 76mm
    All aluminum
    Can be custom coloured
    Complete with Silicone adaptors and Filter

FOCUS ST225 MPE plenums in stock!!!!!

.

  • MPE cast Plenums.I5 cylinder. R5500

    The inlet is a direct bolt on with no modifications required and comes with all fixtures and fittings
    15% increase in volume
    Matched to bottom runners.

  • ST180 Stg1 intake kit R1350... Reduced

    FORD Fiesta St180 Intake
    *Give you the advantage of replacing the restrictive Airbox with a cone filter setup
    *This induction opens the airflow path and gives of a loud turbo noise
    *Engineered to Exact tolerances.

  • Prosport intercooler Gauge R1200

    Prosport intercooler gauge
    Read inlet and outlet temperature.
    52mm gauge
    2 x Temperature sensors

  • Focus ST 225 T5 Thermostatic Oil cooler kits R4800

    10 row oil cooler
    Billet Sandwich Plate
    Anodised AN Swivel fittings
    High temp Reinforced Oil lines
    Thermostatic valve
    Billet Hose separators

  • Kinugawa ST 225 /T5 Wastegate Actuator R1800

    Specced and designed for the K04 turbo found on ST225 Volvo T5 and Kuga 2.5

  • Ford ST 180, 250, 225 and ST150 torque mount inserts R450

    Rear torque mounts are prone to crack under extreme diving conditions
    as well as when more power adders are used.
    *Strengthen yours by inserting these poly inserts
    *Takes ten minutes once its removed from car and very basic skills to fit.
    AVAILABLE for the whole ST range

  • Focus ST225 ECU Holder R950

  • Fiesta ST180 Boost tap R600

    This kit allows you to add boost / vacuum ports to the engine to allow installation of
    a boost gauge, blow off valve, ect.

    Features:
    - CNC
    - Installed in under 5 minutes
    Includes:
    1 X Boost Tap
    1 X Extended Screw
    1X O-ring

  • Oil catch can kits for most ST's From R650

    Diy and complete kits available

  • Ford Ranger Intercooler kit R4500

    DIY kit with large capacity Bar n plate cooler , silicone adaptors, brackets and clamps
    Fits 2.2 and 3.2

  • Ford Focus ST250 big turbo goose necks R800

    12mm Flanges
    Sch 40 steam pipe

  • Fiesta ST Hybrid turbo goosenecks R950

    Bigger inside diameter when doing hybrid bigger compressor wheel.
    Stainless steel

How to order

Step 1:

Please send us an e-mail/sms/whatsapp regarding the item/s you’re enquiring about.

Step 2:

We will e-mail you an invoice with bank details attached.

Step 3:

If the invoiced item/s are in stock, full payment will be required. If the invoiced item/s are  not in stock and have to be ordered, we will require a 50% deposit to secure your order. The balance will be payable upon collection/delivery.

Some products are made to order, normal lead timis 5 days.

Step 4:

You will be required to send us a proof of payment via e-mail/sms/whatsapp.

Step 5:

You will be required to provide us with your full names, address (with postal code) and contact number.

Step 6:

All purchases will be shipped within 24 hours (weekends & public holidays excluded) and your waybill/tracking number will be sent to you via e-mail/sms/whatsapp.

Shipping options (delivery lead time)

  1. Courier guy 
  2. aramex over night flyer @R100
  3. Collections can be pre orginised